The camera or camera obscura is the image-forming device, and photographic film or a siliconimage
sensor is the sensing medium. The respective recording medium can be the film itself, or a digital electronic or magnetic memory. electronic
Photographers control the camera and lens to "expose" the light recording material (such as film) to the required amount of light to form a "latent image" (on film) or "raw file" (in digital cameras) which, after appropriate processing, is converted to a usable image. Modern digital cameras replace film with an electronic image sensor based on light-sensitive electronics such as charge-coupled device (CCD) or complementary metal-oxide-semiconductor (CMOS) technology. The resulting digital image is stored electronically, but can be reproduced on paper or film.
The controls usually include but are not limited to the following:
* Focus of the lens
* Aperture of the lens – adjustment of the iris, measured as f-number, which controls the amount of light entering the lens. Aperture also has an effect on focus and depth of field, namely, the smaller the opening [aperture], the less light but the greater the depth of field--that is, the greater the range within which objects appear to be sharply focused.![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjfhLAWApOv0Wa6v0yfH3O1StC4C3wLjPx2YnWVbACM4-2aMIGp0nDzqiqBDqP8lgUL78y5YHJZY5v-t0y7fUuixtWxpAffIVzZcxLgeF7td8wHaWTZWvEUjvTCiqJMkchaIJuFrhBTp1o/s320/080729184557_19.png)
* Shutter speed – adjustment of the speed (often expressed either as fractions of seconds or as an angle, with mechanical shutters) of the shutter to control the amount of time during which the imaging medium is exposed to light for each exposure. Shutter speed may be used to control the amount of light striking the image plane; 'faster' shutter speeds (that is, those of shorter duration) decrease both the amount of light and the amount of image blurring from subject motion or camera motion.
* White balance – on digital cameras, electronic compensation for the color temperaturefilm stock. In addition to using white balance to register natural coloration of the image, photographers may employ white balance to aesthetic end, for example white balancing to a blue object in order to obtain a warm color temperature. associated with a given set of lighting conditions, ensuring that white light is registered as such on the imaging chip and therefore that the colors in the frame will appear natural. On mechanical, film-based cameras, this function is served by the operator's choice of
* Metering – measurement of exposure at a midtone so that highlights and shadows are exposed according to the photographer's wishes. Many modern cameras feature this ability, though it is traditionally accomplished with the use of a separate light metering device.
* ISO speed – traditionally used to set the film speed of the selected film on film cameras, ISO speeds are employed on modern digital cameras as an indication of the system's gain from light to numerical output and to control the automatic exposure system. A correct combination of ISO speed, aperture, and shutter speed leads to an image that is neither too dark nor too light.
* Auto-focus point – on some cameras, the selection of a point in the imaging frame upon which the auto-focus system will attempt to focus. Many Single-lens reflex cameras (SLR) feature multiple auto-focus points in the viewfinder.
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhGK_7wqBk37DHuHzjO89X-Ii7CU8yD4N-8UjEGFFWjxiIrq-W9wWNlhEmSG7fuRrbOqT2l2oyf0_tvPBsrY3bdPv-YsbsRK2g9KJmyvYTUC2Uuc4YMas7_RlP6vR5hPFEOSKHXaJGdgfw/s320/080514201707_72.png)
Many other elements of the imaging device itself may have a pronounced effect on the quality and/or aesthetic effect of a given photograph; among them are:
* Focal length and type of lens (telephoto, macro, wide angle, fisheye, or zoom)
* Filters or scrims placed between the subject and the light recording material, either in front of or behind the lens
* Inherent sensitivity of the medium to light intensity and color/wavelengths.
* The nature of the light recording material, for example its resolution as measured in pixels or grains of silver halide.
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjWLfCUNw0fRT4EBS8VwJllKNDE0JwboUewRkZiDNxacH91kYzf7wQGsIOJNQQ1nhMT87oJAUcCbK0W6CmmoJH3dMAlbXfiSaXpBlLjxNdoDj4UiaNyIgX4GueAzP9D1Zsz1OCbI8SuS6s/s320/080517152250_57.png)
Photographers control the camera and lens to "expose" the light recording material (such as film) to the required amount of light to form a "latent image" (on film) or "raw file" (in digital cameras) which, after appropriate processing, is converted to a usable image. Modern digital cameras replace film with an electronic image sensor based on light-sensitive electronics such as charge-coupled device (CCD) or complementary metal-oxide-semiconductor (CMOS) technology. The resulting digital image is stored electronically, but can be reproduced on paper or film.
The controls usually include but are not limited to the following:
* Focus of the lens
* Aperture of the lens – adjustment of the iris, measured as f-number, which controls the amount of light entering the lens. Aperture also has an effect on focus and depth of field, namely, the smaller the opening [aperture], the less light but the greater the depth of field--that is, the greater the range within which objects appear to be sharply focused.
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjfhLAWApOv0Wa6v0yfH3O1StC4C3wLjPx2YnWVbACM4-2aMIGp0nDzqiqBDqP8lgUL78y5YHJZY5v-t0y7fUuixtWxpAffIVzZcxLgeF7td8wHaWTZWvEUjvTCiqJMkchaIJuFrhBTp1o/s320/080729184557_19.png)
* Shutter speed – adjustment of the speed (often expressed either as fractions of seconds or as an angle, with mechanical shutters) of the shutter to control the amount of time during which the imaging medium is exposed to light for each exposure. Shutter speed may be used to control the amount of light striking the image plane; 'faster' shutter speeds (that is, those of shorter duration) decrease both the amount of light and the amount of image blurring from subject motion or camera motion.
* White balance – on digital cameras, electronic compensation for the color temperaturefilm stock. In addition to using white balance to register natural coloration of the image, photographers may employ white balance to aesthetic end, for example white balancing to a blue object in order to obtain a warm color temperature. associated with a given set of lighting conditions, ensuring that white light is registered as such on the imaging chip and therefore that the colors in the frame will appear natural. On mechanical, film-based cameras, this function is served by the operator's choice of
* Metering – measurement of exposure at a midtone so that highlights and shadows are exposed according to the photographer's wishes. Many modern cameras feature this ability, though it is traditionally accomplished with the use of a separate light metering device.
* ISO speed – traditionally used to set the film speed of the selected film on film cameras, ISO speeds are employed on modern digital cameras as an indication of the system's gain from light to numerical output and to control the automatic exposure system. A correct combination of ISO speed, aperture, and shutter speed leads to an image that is neither too dark nor too light.
* Auto-focus point – on some cameras, the selection of a point in the imaging frame upon which the auto-focus system will attempt to focus. Many Single-lens reflex cameras (SLR) feature multiple auto-focus points in the viewfinder.
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhGK_7wqBk37DHuHzjO89X-Ii7CU8yD4N-8UjEGFFWjxiIrq-W9wWNlhEmSG7fuRrbOqT2l2oyf0_tvPBsrY3bdPv-YsbsRK2g9KJmyvYTUC2Uuc4YMas7_RlP6vR5hPFEOSKHXaJGdgfw/s320/080514201707_72.png)
Many other elements of the imaging device itself may have a pronounced effect on the quality and/or aesthetic effect of a given photograph; among them are:
* Focal length and type of lens (telephoto, macro, wide angle, fisheye, or zoom)
* Filters or scrims placed between the subject and the light recording material, either in front of or behind the lens
* Inherent sensitivity of the medium to light intensity and color/wavelengths.
* The nature of the light recording material, for example its resolution as measured in pixels or grains of silver halide.
0 comments:
Post a Comment